£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
GPS Module for VESC EXPRESS BN-280 & UART Connection Cable
GPS Module for VESC EXPRESS BE-280
232 level output, 9600, 1HZ output, standard NMEA-0183 protocol output.
| Parameter | Description | |
| Chip characteristics |
Chip | U-blox U7 |
| Receiving mode | GPS, QZSS, WAAS, SBAS, EGNOS, MSAS | |
| Frequency | GPSL1, SBAS L1 | |
| Channel | 56 search channels | |
| Sensitivity |
Track | -162dBm |
| Recapture | -160dBm | |
| Cold start | -148dBm | |
| Precision |
Horizontal accuracy | 2.0 m CEP 2D RMS SBAS assist (open space) |
| Speed accuracy | 0.1m/s 95% (SA off) | |
| Time accuracy | 1us | |
| Start Time |
Cold start | 29s |
| Warm start | 25s | |
| Hot Start | 1s | |
| Output Data |
Baud rate | 4800bps-921600bps,default 9600bps |
| Output level | TTL or RS232, default RS-232 level | |
| Output protocol | Default NMEA-0183 protocol | |
| Standard GNSS | 1Hz-10Hz, default 1Hz | |
| Work limit |
Height | 50,000m maximum |
| Speed | 515m/s maximum | |
| Gravity acceleration | 4g maximum | |
| Power consumption | Voltage | DC 3.6V-5.5V, typical: 5.0V |
| Current | Normal 45mA@5.0V | |
| Physical parameter |
Size | 28mm*28mm*8mm |
| Weight | 11.5 grams | |
| Line length | 2m | |
| Connector | 1.25 pitch 6pin socket | |
| Surroundings | Operating temperature | -40 °C ~ +85 °C |
| storage temperature | -40°C ~ +85°C | |
| Indicator light | TX light | Power-on blue light flashes to indicate that there is data output. |
| PPS light | The light is not lit when it is not positioned. After 3D positioning, it starts to blink. | |
1x GPS Module for VESC EXPRESS BE-280
1x UART GPS to VESC EXPRESS Silicon Cable Black/Yellow/White/Red - 100mm
Weight: 19g
HCC: 8544200030
1x UART GPS to VESC EXPRESS Silicon Cable Black/Yellow/White/Red - 100mm
Weight: 19g
HCC: 8544200030
Related Products
-
GR4 Re-enforced GLASS FIBRE Single VESC 6 MOUNTING PLATE - -
32mm Handle Bar Clamp to mount the VESC DISPLAY UNIT - VDU Display - -
2x VESC 6 Monster Box External HEAT SINK - 5mm Cooling fins - -
QUALA-T Power Switch Kit - Power Switch, 16mm Fixing Nut & Cable Harness. Blue, Red or White 5v LED - -
VESC Connect NRF Dongle with EXTERNAL DIPOLE Flexible Antenna - -
ALUMINIUM mounting Plate for TWIN VESC 6 - -
VESC HD XT90 to XT60 Power Adaptor - -
TRAMPA's VESC based MAGNETO WAND Remote Control is due to arrive from the future very soon - -
ALUMINIUM mounting Plate for Single VESC 6 - -
VESC EXPRESS with Can-Bus Power cable - -
VESC 6 HEAT SINK - 5mm Cooling fins - -
22mm Handle Bar Clamp to mount the VESC DISPLAY UNIT - VDU Display - -
VESC Connect NRF Dongle with INTEGRATED Antenna - -
VESC 6 External Splash proof Silicone Seal for CNC Heat sink Box - -
VESC Connect NRF Dongle with EXTERNAL PCB Antenna - -
GR4 Re-enforced GLASS FIBRE TWIN VESC 6 MOUNTING PLATE - -
VESC DISPLAY UNIT - Hi-GO Cable Kit -
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024