£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
TRAMPA MUD-PLUGGER 7 Inch Tyre measures 3.75x 1.75x 7 Inch or 175x 45mm with 3.75 inch Rim & fits all 3.75 inch Hubs
TRAMPA's 7 Inch MUD-PLUGGER Tyre is a super advanced & incredibly lightweight tyre that fits all the 3.75 in hubs on the market & is the perfect tyre choice when your when riding in the worst of conditions, needing the maximum amount grip possible!!
Measuring 7x 1.75 Inch or 175mm x 45mm with a 3.75 Inch Rim, the MUD-PLUGGER tyre has a box shaped construction whilst the 2PR soft compound rubber coating has an aggressive & well spread tread pattern that see's 'Grip on top of Grip' on the knobbles. Making the Mud-Plugger tyre 'Box shaped', having much straighter sides for example compared to the kind of Ballon shape of the 8 inch ALPHA tyre when inflated, allows for much more 'Surface Contact' resulting in much more 'Traction' for the user. The Mud-Plugger also has a 'Wide Center Bead' allowing reasonable top end roll speeds but as it is so Deep Grooved (5mm at the deepest) & very 'knobbily' around its sides to cut through the deepest of mud, this suggests the TRAMPA Mud-Plugger tyre works best in really bad conditions more than straight line speed on Hard surfaces!
TRAMPA's 7 Inch Mud-Plugger tyre has 3.75 inch Steel Bands molded into rims of the tyre, therefore the 7 Inch Mud-Plugger tire will fit onto all 3.75 inch hubs currently on the market.
The Mud-Plugger Tyre is produced using a Soft Compound '2PR rubber' wrapped around whats known as a High TPI (Threads per Inch) construction. A High TPI results in a super lightweight, very flexible yet strengthened construction. High TPI is applied to all top quality bicycle tyres.
Having invested into professional testing at the factory & using our own TRAMPA hubs to make the testing, the factory have given this tyre a recommended maximum inflation pressure of 65psi which is much more than needed & more than any other brand & testament to the design & superior strength of all of the TRAMPA HUBs! Its true, the more you inflate your tyres the faster you will roll but these are off road tyres & so its not always good to have high inflation! Over inflation of your tyres may cause an explosion which could cause serious injury to yourself, however running your tyres as low as 20-25psi (depending on how much you weigh & how you ride etc) is more likely to give you the best grip when riding in the soft stuff....
If you wish to connect this tyre to the hubs on your E-Board the pulley size to fit to give the best match for power/top speed is the 62 Tooth.
TRAMPA's 7 Inch MUD-PLUGGER Tyre is a super advanced & incredibly lightweight tyre that fits all the 3.75 in hubs on the market & is the perfect tyre choice when your when riding in the worst of conditions, needing the maximum amount grip possible!!
Measuring 7x 1.75 Inch or 175mm x 45mm with a 3.75 Inch Rim, the MUD-PLUGGER tyre has a box shaped construction whilst the 2PR soft compound rubber coating has an aggressive & well spread tread pattern that see's 'Grip on top of Grip' on the knobbles. Making the Mud-Plugger tyre 'Box shaped', having much straighter sides for example compared to the kind of Ballon shape of the 8 inch ALPHA tyre when inflated, allows for much more 'Surface Contact' resulting in much more 'Traction' for the user. The Mud-Plugger also has a 'Wide Center Bead' allowing reasonable top end roll speeds but as it is so Deep Grooved (5mm at the deepest) & very 'knobbily' around its sides to cut through the deepest of mud, this suggests the TRAMPA Mud-Plugger tyre works best in really bad conditions more than straight line speed on Hard surfaces!
TRAMPA's 7 Inch Mud-Plugger tyre has 3.75 inch Steel Bands molded into rims of the tyre, therefore the 7 Inch Mud-Plugger tire will fit onto all 3.75 inch hubs currently on the market.
The Mud-Plugger Tyre is produced using a Soft Compound '2PR rubber' wrapped around whats known as a High TPI (Threads per Inch) construction. A High TPI results in a super lightweight, very flexible yet strengthened construction. High TPI is applied to all top quality bicycle tyres.
Having invested into professional testing at the factory & using our own TRAMPA hubs to make the testing, the factory have given this tyre a recommended maximum inflation pressure of 65psi which is much more than needed & more than any other brand & testament to the design & superior strength of all of the TRAMPA HUBs! Its true, the more you inflate your tyres the faster you will roll but these are off road tyres & so its not always good to have high inflation! Over inflation of your tyres may cause an explosion which could cause serious injury to yourself, however running your tyres as low as 20-25psi (depending on how much you weigh & how you ride etc) is more likely to give you the best grip when riding in the soft stuff....
If you wish to connect this tyre to the hubs on your E-Board the pulley size to fit to give the best match for power/top speed is the 62 Tooth.
Official Dimensions - 3.75x 1.75x 7 Inch or 175x 45mm with 3.75 inch Rim
Fits to hubs with 3.75 x 2 Inch Rims
HI TPI Casing - Threads Per Inch .
Minimum Inflation 15psi
Maximum Inflation 65psi
Recommended Riding Inflation 20-35psi
Inflated tyre diameter 1.75 Inch or 45mm
Inflated tyre width 7 Inches or 175mm
1x MUD-PLUGGER 7 Inch Tyre 3.75x 2x 7
Weight: 153g
HCC: 4011900000
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024