This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA's Deck Widening, Cable routing W-Shaped Concaved WINGS - Complete Set for 1x Deck

TRAMPA's Deck Widening, Cable routing W-Shaped Concaved WINGS - Complete Set for 1x Deck TRAMPA WING for MOUNTAINBOARDS will widen your deck, stiffen the flex, route the cables and increase your overall performance!! 1x Naked Wing, you need 2  Wings per Deck!! M3.5 x 12 PAN Headed TORX Bolt. - Used to secure the WINGS to the TRAMPA Deck Bindings Bolt Kit M6x35 Countersunk Bolt Kit 16/17ply to fit Bindings to the deck when using WINGS M6 Marine Grade Stainless Steel Countersunk Binding Bolt Kit 1x 10 Inch squares of Top Quality Jessup Grip tape
RRP
£50+

 

 

TRAMPA WING for MOUNTAINBOARDS will widen your deck, stiffen the flex, route the cables and increase your overall performance!! 1x Naked Wing, you need 2 Wings per Deck!!

Injection moulded Riser pad, with a foot-hugging W Shaped concave & integrated cable routing channels.

•By widening the deck, & adding extra leverage beneath the toes & heels, which gives you more control of board.

•Channels on the underside allow for under-foot cable routing from the battery boxes to the Motors.

•W-shape helps to relieve foot ache. 

 

Specifically designed to fit the NEW 9-69 & 9-73 Mountainboard decks, TRAMPA WINGS can also be fitted to ALL TRAMPA Mountainboards(Some modifications to deck pre-summer 2021 shape may required modification)

 

1x 10 Inch squares of Top Quality Jessup Grip tape

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges.

 

 

M6 x 35mm TORX Countersunk Bolt Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M3.5 x 12 PAN Headed TORX Bolt. - Used to secure the WINGS to the TRAMPA Deck

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
DECK WEIGHTS INCLUDE ALL HARDWARE & DECK ACCESSORIES

Complete MOUNTAINBOARD Deck TRAMPA WING KIT!

Having invested lots of money into a plastic injection mold the TRAMPA WINGS are Made in the UK using a Long stranded flexible Nylon material with splits in the shape to allow for extra flex. Underneath the WINGS have a Matrix style construction to maximise strength Whilst keeping weight to a minimum. Straight Channels in the matrix pattern allow the motor cables to run without interferance from the Battery Box mounted in the middle of the deck to the motors at the rear.

TRAMPA WINGS will fit to any of the latest TRAMPA Decks, the 9-69 & 9-73 Decks, without any modification required other than the holes needed to screw into.

By installing the TRAMPA WINGS you will Increase the width of your TRAMPA deck from 9 to 10 inches wide.

WINGS can be retro fitted to older TRAMPA decks, (35º HOLYPRO, 35º LONG, HS-11) however depending on the model may mean that some modification to the deck may be required to make the wings fit the deck correctly, but all TRAMPA Decks can easily be modified using a Jigsaw or router.

In this kit you get 

2x TRAMPA WING for MOUNTAINBOARDS - Naked
28x M3.5 x 12 PAN Headed TORX Bolt. - WINGS
8x M6 x 35 Countersunk TORX Bolt
8x M6 Nut - Marine Grade Stainless steel Nylock nut
8x M6 Washer Form C - Marine Grade Stainless Steel
2x 1x 10x10 Inch square Jessup Grip Tape

HCC: 6815120000
Quantity required:
We have enough parts to make…  
RRP £50 - for the complete set

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon