Home»Parts»TRUCK PARTS»Hangers»ATB BRAKE Spring Truck Hanger »HS-11 BRAKE Hanger - INFINITY or VERTIGO

The ATB INFINITY MAGURA BRAKE HANGER is the strongest SPRING TRUCK Hanger in the TRAMPA product range! To ensure the maximum strength possible the hanger body is made from FORGED ALUMINUM and is one solid piece - with no weight saving holes !

The Infinity Hanger is drilled & fitted with 12mm SOLID STEEL Axles. The Axles have also been HEAT TREATED. Heat treating steel makes it substantially stronger & more resistant to impact. 12mm Solid Steel Axles are slightly heavier than alternatives displayed on the TRAMPA website, but they are by far the strongest Axles in the TRAMPA range. Marine Grade Stinless steel GRUB SCREWS help keep the Axles locked into the correct place within the Hanger,

A CNC milling machine is used to drill the Kingpin Holes accurately. Ensuring the Kingpin Holes are accurately placed guarantee's the best performance to the rider as well as making the truck easy to assembly & service. Whilst the hanger is at the CNC factory, the workers modify the back of the hanger by milling a flat surface (so we can mount the brake system flush against the hanger) and then drilling an extra hole and inserting a thread into the hanger. With use of a small cradle at the top to stop movement we are able to screw in the MAGURA braking system into this thread and make a very strong fix between the two, making your braking system very very powerful indeed. The Infinity Hanger is EDP painted MATT BLACK for metal protection & colour coordinating good looks before the CNC work is carried out.

The Infinity Brake Board Hanger measures 16 Inches in total width. When the wheels are fitted to the Hanger, the board has a "center wheel width" of 14 Inches. The Infinity Brake hanger will fit to all TRAMPA Baseplates.

TRAMPA's Infinity Brake Hanger uses 2x 18.5mm x 12mm SPACERS (1 either side). These spacers are slightly longer than TRAMPA's regular spacer, this is to give the correct positioning on the axle for the brakes to work against the wheel. The spacer slips onto the axles, leaving the perfect space to mount the TRAMPA wheels accurately. Use the 7/16ths of an inch Axle Nuts to lock the wheels into place on the axle.

Kingpin bushings push into the Kingpin holes, in both the Hanger & the Baseplate. When all the bushings are in position, push the Baseplate over the Hanger and into position so that all the Kingpin holes line up. When this is the case you will be able to push the kingpin, from the front to the truck to the back, through the holes in the assembly, connecting them all together. Remember to add the washer onto the kingpin before sliding into the assembly.