£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
Bearing conversion spacers - fits 12mm Bearings to 9.525mm (3/8ths UNC) Skate axles x 8
These clever reducer sleeves fit inside the TRAMPA bearings and reduce the axle size they fit too from 12mm to 10mm, (most skate trucks have 10mm axles) which is excellent news for 10mm axle riders as they no longer have to fork out the extra money to pay for the special reducer bearing which scrub used to sell. Due to the accurate fitting of the TRAMPA reducer sleeve into the bearing, when the stainless steel half nut holding the hub onto the axle is tightened up too the bearing reducer sleeve, the sleeve works in perfect harmony with the bearing casing, holding it firmly in a precise position on the truck, ensuring a good spin rate from the bearing and giving maximum performance for the rider.
Bearing conversion Spacer converts 12mm Bearings to fit 9.525mm Skate & Spring Truck TiTanium Axles
Use this handy little part to convert 12mm TRAMPA bearings to fit onto 9.525mm (3/8ths of an inch) Axles... You will commonly find 9.525mm axles on Skate Trucks or Trucks with Titanium Axles. Simply slip the Conversion Spacer into your 12mm Bearing & then insert the Wheel back onto the axle.... Couldnt be easier.... :-)
The pressed aluminium is accurately made so it fits snugly into your bearing and tightly slides over the axle. The flanged Rim allows the axle nut to tighten without squashing the bearing wall, ensuring free spinning maximum performance from your bearings at all times. The sleeve can be re used over and over again but remember to replace your bearings regularly....
Use this handy little part to convert 12mm TRAMPA bearings to fit onto 9.525mm (3/8ths of an inch) Axles... You will commonly find 9.525mm axles on Skate Trucks or Trucks with Titanium Axles. Simply slip the Conversion Spacer into your 12mm Bearing & then insert the Wheel back onto the axle.... Couldnt be easier.... :-)
The pressed aluminium is accurately made so it fits snugly into your bearing and tightly slides over the axle. The flanged Rim allows the axle nut to tighten without squashing the bearing wall, ensuring free spinning maximum performance from your bearings at all times. The sleeve can be re used over and over again but remember to replace your bearings regularly....
8x 9.525mm Axle - Bearing Conversion Spacer
------------------------------------------
Bearing Inner Diameter (Axle thickness) - 9.525mm
Bearing Outer Diameter (Hub Housing width) - 12mm
Bearing Tickness (Seating depth) - 8mm
Weight: 16g
HCC: 8714929000
Related Products
-
12mm Bearings - 12mm x 28mm axle ABEC 5 rated RED Rubber Sealed Sidewalls x1 Wheel - -
8x TRAMPA CERAMIC 6001 2RS ATB Bearings GREEN - 12mm x 28mm axle GREEN Rubber Sealed Sidewalls - -
TRAMPA CERAMIC 6001 2RS ATB Bearings GREEN - 12mm x 28mm axle GREEN Rubber Sealed Sidewalls x1 Wheel - -
Bearing conversion spacers - fits 12mm Bearings to 10mm Scooter Axles x 8 - -
12mm Bearings - 12mm x 28mm axle ABEC 5 rated BLUE Rubber Sealed Sidewalls x4 Wheels - -
12mm Bearings - 12mm x 28mm axle ABEC 5 rated BLACK Rubber Sealed Sidewalls x4 Wheels - -
12mm Bearings & 9.525mm Reducers - 12mm x 28mm axle ABEC 5 rated RED Rubber Sealed Sidewalls1x wheel - -
TRAMPA CERAMIC 6001 2RS ATB Bearings with Reducer Sleeves for 9.525mm Axles - 12mm x 28mm axle GREEN Rubber Sealed Sidewalls x1 wheel - -
12mm Bearings & 9.525mm Reducers - 12mm x 28mm axle ABEC 5 rated BLACK Rubber Sealed Sidewalls x1 Wheel - -
12mm Bearings & 9.525mm Reducers - 12mm x 28mm axle ABEC 5 rated BLUE Rubber Sealed Sidewalls x1 Wheel - -
12mm Bearings - 12mm x 28mm axle ABEC 5 rated BLACK Rubber Sealed Sidewalls x1 Wheel - -
12mm Bearings - 12mm x 28mm axle ABEC 5 rated RED Rubber Sealed sidewalls 4x wheels - -
12mm Bearings - 12mm x 28mm axle ABEC 5 rated BLUE Rubber Sealed Sidewalls x1 Wheel -
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024