This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

66 Tooth x 20mm wide PRO BELT DRIVE Slave Pulley with Pressed bearing to fit into the NEW 20mm PRO BELT DRIVE Motor Mounts

RRP
£30+

GEARING
PURCHASE

As the 20mm wide 66 Tooth OBD Pulley is supported / mounted on the axle with a press fitted bearing, when you then include the 2x bearings in the wheel, there are therefore 3 points of mounting contact on the axle in the assembly of the Motor drive when fixing to the wheel giving a very nice well balanced secure fit ensuring maximum performance at all times.
The power of the TRAMPA Motors is huge & to have the power spread across the axle is important to the delivery of smooth performance...
The 66 Tooth Pulley needs to be correctly positioned on the axle to ensure the belts align perfectly with a 9.5mm spacer.
So if you don't already have one, then you WILL NEED a 12x 16x 9.5mm Spacer to position the pulley & wheel in the perfect location on the axle to acquire maximum Torque

You may also need some M4 x 20mm Hex spacers & M4 x 10mm Dome Head TORX Bolts to fit this pulley to your wheel....
As this Pulley has 5 spokes, it is specifically designed to only fit to any the 5 spoke hubs that TRAMPA produces. So TRAMPA's SUPERSTAR 8 or 9 inch Megastar & PHATLADS hubs...

Weight: 188g
HCC: 8483502090

This 66 Tooth OBD Pulley is specifically designed to fit any of the Hubs that TRAMPA produces.

To connect the Pulley to any of the 5 Spoke TRAMPA Wheels then you need 5x M4x20mm Hex Spacers, M4x 10mm Dome Head Bolts & then you will need 1x 9.2x12mm Axle Support spacer to fit this pulley & wheel to fit onto a TRAMPA 12mm Axle correctly.

To connect the Pulley to 6 Spoke TRAMPA Wheels then you need 6x M4x22mm Hex Spacers, M4x 10mm Dome Head Bolts & then you will need 1x 9.2x12mm Axle Support spacer to fit this pulley & wheel to fit onto a TRAMPA 12mm Axle correctly...